SRO-71X-TCB

PROGRAMMABLE OVEN WITH INFLATABLE MEMBRANE FOR THERMO COMPRESSION BONDING APPLICATION

2018 getter complete front- as TCB 04062018
TCB Retuschiert b grau
Bild_für_Flyer

Quick look at: SRO-71X-TCB

PROGRAMMABLE OVEN WITH INFLATABLE MEMBRANE FOR THERMO COMPRESSION BONDING APPLICATION

ATV’s successful SRO-71X series IR vacuum reflow oven is the heart of ATV’s reflow soldering principle.  Our SRO-71X-TCB, Thermal Compression Bonding is also based on which this system is developed. The Single Cold Wall Process Chamber approach is a standard on itself and is also applied for the SRO-71X-TCB which fulfills all your process requirements.

 

Our Thermal Compression Bonding system has an isostatic press in combination with an elastomer membrane. This patented technology gives you the opportunity to use a maximum pressing force of 0,5MPa over 150 mm Ø. This pressure can be gradually built up to the desired process pressure under which you want to perform your process. With our applied membrane technology you will not be faced with product shifting from start to finish. Another advantage for our technology is that you may process simultaneously products which have a different topography. This will have no influence on the expected final process results.    

 

Also in this tool ATV uses all its know-how of the cold wall technology in combination with the IR heating concept, vacuum assembly as well as formic acid atmosphere to achieve the prefect solder joints you need for a reliable product. Working with the SRO-71X-TCB you will notice that programming is easy and with the 100 step programming steps you will be able to fine tune your process in such a way that a process success is guaranteed.

 

It is ATV’s goal to always reach the market best soldering results using its proven single Chamber Process concept as its core competence for over 30 years.

 

Facts SRO-71X-TCB

Technical information and figures

Technical Data SRO-TCB

Footprint:     

740mm x 990mm x 1800mm

 

Weight: 

240 kg (options depending)

Working Height:

950 – 1050mm adjustable

chamber hight:

up to 100mm

Heated Area:    

217 x 227mm; Ø160mm for the bonder configuration

Chamber Lid Open/Closing:    

Automatic lid closing/opening and locking/unlocking

Heating Method:   

PID controlled IR lamp array heating principle of heated plate

Heating Zones:

2; PID controlled

Cooling water supply:

Cold wall technology

Inlet max. 4 bar; diff. pressure min. 2 bar

Power connection:    

3 x 400 VAC, 32 A, 19kW, 50-60 Hz,

TN-C-S (other power options available)

Common Applications SRO-TCB

Transient Liquid Phase Soldering/Bonding

Cu pillar/micro bump flip chip soldering

Low pressure silver sintering

Micro Peltier/TEC Soldering/Bonding

Features SRO-TCB

  

Viewing window

Membrane assembly ≤ 5 bar gas pressure

PLC based controls:

               Temperature

               Gas flow

               Vacuum

               Pressure

               Temp. Profile

100 steps/recipe, Step length up to 99 min.

Cooling rate: min.:

               25°C/minute from T.max. down to 60°C

 

Max. temperature:

               450°C permanent (standard config.)

               300°C permanent (bonder config.)

Oxygen < 1,0ppm

Safety Alarms

Formic Acid supply Assembly

Two Gas supply connections

 

Options SRO-TCB

Additional values

Customized Tooling

Various vacuum pumps

 

Fill out the form and our latest SRO-71x-TCB information will be sent to you by e-mail.

Fields marked with an * are mandatory.

Downloads

Documents "to go"

ATV-Technologie GmbH

Entwicklung und Vertrieb von Maschinen und Geräten für die Mikroelektronik

info {at} atv-tech.de

Johann-Sebastian-Bach-Str. 38

85591 Vaterstetten

Germany

Phone: +49 (0)8106-3050-0

Fax: +49 (0)8106-3050-99

Bild_für_Flyer