top of page
SRO-716-HVAC 3500x3500 RGB
SRO-716 P40 (7)
SRO-716-SP 3500x3500 RGB
SRO-716-750°C 3500x3500 RGB

Quick look at: SRO-716

With its Single Cold Wall Process Chamber approach ATV is setting the benchmark in both the R&D and Pilot Line Production markets. Here our highly successful SRO-716 IR vacuum reflow oven marks the heart of ATV’s reflow soldering ovens and proves ready for any and all of your process requirements. 


Our Solder Reflow Oven SRO-716 offer the perfect tool for reflow soldering applications, rapid thermal annealing and brazing capabilities. Moreover the direct IR lamp heating technology will provide you with a maximum heated surface of 314 mm². With its outstanding process stability and repeatability this tool is found in almost every major R&D center and pilot line production. In order to achieve void free and prefect solder joints ATV applies all of its know-how in cold wall technology, IR heating, vacuum assembly and formic acid.


Due to its high clearance above the heated surface the system allows for easy handling of IGBT and power electronics packages while the large heated area of  the SRO-716 (314x314mm) offers excellent flexibility. As a result the SRO-716 can be utilized in every conceivable semiconductor and MEMS application – whether using flux, fluxless or solder paste for your reflow process. When working with the SRO-716 our 100-Step-Recipe will make programming easy and guarantee superb process results. 


Just imagine creating a fluxless process via a formic acid enriched atmosphere and receiving perfect void free soldering results – again and again. Due to its very low nitrogen consumption the SRO-716 are prepared for the latest generation of flux-based solder pastes which depend on low oxygen content during the process run.


Facts SRO-716
Technical information and figures
(depending on system configuration)

Technical Data SRO-716

depending on system configuration


960 x 760 x 1800mm  (LxWxH) 



240kg. (minimum configuration)

Chamber Height: 

up-to 100mm

Heated Area:    

314 x 314mm

Chamber Lid Open/Closing:    

automatic lid closing/opening and locking/unlocking,

Heating Method:   

IR         (12pcs. Lamp Array)

Heating Zones:

3 Zones

Common Applications SRO-716

depending on system configuration



Power Semiconductors

Sensors/IR Bolometer Detector

MEMS Devices

DIE Attachment

High Power LED

Hybrid Assembly

Flip Chip

Package Sealing


Transient liquid phase soldering/bonding

Ag sintering

Thermo compression bonding

CPV, Laser bar

Features SRO-716

depending on system configuration/optionals


Flux-less, Solder Paste and Flux (optional configuration)


Direct IR Heating

Surface touch TC

Multiple TC monitoring

Exchangeable Ceramic Heater Plate

Process temperature 450°C up to 750°C (optional configuration)

Oxygen = N2 supply quality

100 steps/programm


Options SRO-716
Additional values depending on application and final configuration

Spring pin array (in chamber lid)

Custom tailored substrate fixture

Flux management

Flux and solder paste


Top heater

Lift pins 

Formic acid enriched atmosphere

low vacuum, fine vacuum, high vacuum

Gas plasma atmosphere

H2O / O2 analyzing

RGA/Mass spectrometer

brochure pic 716.PNG

Fill out the form and our latest SRO-716 information will be sent to you by e-mail.

Fields marked with an * are mandatory.


Documents "to go"

bottom of page